T 7055 DBL

Just Go Active Low Profile
Just Go Active Low Profile / T 7055 DBL
Length
735 cm
Width
232 cm
Height
299 cm
Sleeping berths max.
5
Price
Low Profile

Layout
T 7055 DBL Active

Living space without trip hazards, platform moved to the driver's cab
Centre bathroom separable from the living area
Height-adjustable queen bed
Living space without trip hazards, platform moved to the driver's cab

Exterior View

70 cm wide habitation door
Body technology: Lifetime
Rear garage with anti-slip surface
70 cm wide habitation door

Living in the Just Go Active

  • Spacious living

    The harmoniously coordinated interior creates a warm and welcoming atmosphere. The impressive 213 cm of headroom ensures that even taller travellersnever feel confined.

    Perfect for relaxing – the comfortable transverse seating lounge with free-standing table. The table can be adjusted in all directions and folded down to allow unobstructed access to the cab.

    A major advantage of this seating arrangement: when travelling as a couple, there is no need to swivel the driver or passenger seat to sit comfortably at the table. It also creates a lovely open, spacious feel inside the vehicle.

  • The L-shaped seating lounge

    Since the L-shaped seating lounge creates a more defined division between the living area and kitchen, it actually feels more like a U-shaped seating lounge.

    Another benefit: two additional seats with 3-point belts are included as standard – no conversion needed.

  • Sleep like a dream – in the queen bed

    The 190 x 150 cm queen bed is height-adjustable as standard. Would you prefer more space in the rear garage or extra headroom in the bedroom? The choice is yours – depending on your loading requirements, you can adapt the vehicle as required.

    One key advantage of the queen bed layout: you can get up at night without disturbing your partner – and it’s also much cosier …

    The large wardrobes to the left and right of the bedhead are easy to access and come equipped with clothes rails.

    • T 7055 DBL

  • The single beds (EB)

    The single beds are exceptionally spacious, each offering a sleeping area of 215 x 80 cm. By pulling out the central slatted frame and adding an infill cushion, they can be easily transformed into a single large sleeping area measuring 210 x 190 cm.

    Beneath the foot of the beds, large wardrobes on both the left and right provide ample storage.

    • T 7055 EB / T 7055 EBL

  • The pull-down bed (option)

    If required, a two-berth electric pull-down bed can be added above the seating lounge. During the day, it tucks away discreetly beneath the ceiling and, in the evening, it can be lowered at the touch of a button.
    The perfect solution if you often travel as a group of four.

    Tip: For occasional overnight guests, converting the seating lounge might be all you need – there is a cost-effective option for that, too. Just ask your Dethleffs dealer for details!

  • A stylish and spacious bathroom

    Premium materials and workmanship also lend the bathroom a touch of luxury

  • The large bathroom

    Love having plenty of space and elbow room in the bathroom? You’ll find both here! Just close the bathroom door towards the kitchen/living room and enjoy a full-width large bathroom – complete with a separate shower cubicle.

  • COOKING – Just all you need

    Fully equipped L-kitchen with 2-burner gas hob, practical work surface and large drawers. The lateral Multiflex rail system with hooks and hanging elements is especially handy.

    • T 7055 DBL

  • COOKING – Just all you need

    An oven can be added to the 137-litre fridge/freezer combination on request.

  • COOKING – Just all you need

    Even large pots and pans can be easily washed in the wide sink with a high tap.

  • COOKING – Just all you need

    The overhead lockers are equipped with a soft-close function and are indirectly illuminated.

Variety of choice

  • Upholstery
Heron (partial leather)
  • Wood décor
Noce Nagano

Dimensions

1
2
3
4
5

T 7055 DBL

1 Length 735 cm
2 Height 299 cm
3 Width 232 cm
4 Headroom 213 cm
5 Wheelbase 3954 mm

2,0 l TDCi Ford EcoBlue

Fuel Diesel

6-gear

CCM
1.995
Power
130 hp
Electrical installation
Standard equipment
Leisure battery AGM, 95 Ah
On-board control panel
Awning light 12 V
Light Moments: Indirect ambient lighting above the overhead lockers
LED lighting throughout the vehicle
Dimmable LED lighting in the separate shower and toilet room
EBL with separate FI protection switch
Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator
Spotlights in the roof lining above the habitation door
Light Moments: Indirect wall surface ambient lighting
Number of sockets 1x 12V, 8x 230V, 4x USB
Optional equipment
Solar power system 110 watt
2nd AGM habitation battery, 95 Ah incl. 45 A charge booster
Heating
Standard equipment
Gas hot air heating 6kW with hot water boiler
Heating in the seating unit for optimum heat distribution, built-in
Optional equipment
Gas hot air heating 6kW with 1.8kW electric heating element and hot water boiler incl. digital control panel
Water supply
Standard equipment
Submersible pump
Fresh water tank in insulated and heated area
Optional equipment
Switch for water pump
Insulated waste water tank
Gas supply
Standard equipment
Storage space for 2 gas bottles with a filling weight of 11 kg each
Optional equipment
Automatic gas cylinder switchover incl. crash sensor and EisEx

Downloads

More vehicles from the Just Go Active series

0 Results
Filter
  • Body type
  • Sleeping berths
  • Bed types
  • Length
  • Number of seats

Important information regarding the selection of your motorhome

When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:

1. The technically permissible maximum laden mass…

… is a value set by the manufacturer which the vehicle may not exceed. Dethleffs specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.

 

2. The mass in running order…

... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, Dethleffs weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.

Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.


3. The permitted number of seats (including driver)…

… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated. 

Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.


4. The manufacturer-specified mass for optional equipment…

… is a value set by Dethleffs per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle. 

Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.

 

5. The additional weight of optional equipment and packages...

... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.