T 45

Globebus Go Low Profile
Technical Data
Globebus Go Low Profile / T 45
Technical Data
globebus-go_t45_4c_2023_v4-01.

T 45

Find a dealer
View technical information
Globebus Go Low Profile T 45
Price (incl. VAT) a)
Standard chassis Ford Transit Low Platform
Standard engine 2,0 l TDCi Ford EcoBlue
kW (bhp) 96 (130)
Emission standards Euro 6e-bis
Overall length, approx. 668
Overall width, approx. 219
Overall height, approx. 266 1
Headroom in living area, approx. 190
Towable load braked/unbraked 2000 / 750
Wheelbase, approx. 3750
Bed dimension: Central / middle bed, L x W, approx. 155 x 101 - 75 (○)
Bed dimension: Rear bed, L x W, approx. 201 x 80 / 193 x 75 / 198 x 160 (○)
Sleeping berths standard / max. 2 / 3 (○)
Mass in running order (+/-5%)* 2650 (2518 to 2783)*
Manufacturer-specified mass for optional equipment* 680
Technically permissible maximum laden mass* 3500
Permitted number of seats (including driver)* 2 - 4 (○)
Refrigerator volume (thereof freezer), approx. 83 (10) / 131 (15) (○)
Waste water tank, approx. 95
Fresh water tank capacity, total/ Fresh water tank capacity at driving filling 115 / 20
Measurement storage opening right (W x H) 60 x 95
Measurement storage opening left (W x H) 65 x 75 (○)
1 Please note that the total height may increase due to additional roof structures and optional equipment..

a) This is a recommended retail price based on German retail prices. Prices in other countries may differ due to currency conversion and country-specific VAT, fees and import duties. For the latest information, please always enquire with a local dealer about the prices applicable in your country.

* The specified mass in running order is a default value defined in the type-approval procedure. Due to manufacturing tolerances, the actual weighed mass in running order may deviate from the value stated above. Deviations of up to ± 5 % of the mass in running order are legally permissible and possible. The permissible range in kilograms is given in brackets after the mass in running order.  The manufacturer-specified mass for optional equipment is a calculated value for each type and layout that Dethleffs uses to determine the maximum weight available for factory-fitted optional equipment. The limitation of optional equipment is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs.  The real weight of your vehicle ex works can only be determined when it is weighed at the end of the line. If, in exceptional cases, the weighing shows that the actual load capacity falls below theminimum pay-mass despite limiting the optional equipment due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.  The technically permissible maximum laden mass of the vehicle and the technically permissible maximum mass on the axle must not be exceeded.

(○) Optional
Length
668 cm
Width
219 cm
Height
266 cm
Sleeping berths max.
3
Technically permissible maximum laden mass
3.500 kg
Price
Low Profile

Layout T 45

70 cm wide habitation door
Compact: 2.20 m width and 6.69 m length
Practical worktop extension
Spacious bathroom with swivelling shower enclosure and sliding door
Floor to ceiling mirror
70 cm wide habitation door
360°
360° view

The 360-degree images are designed to provide you with an impression of the space. Please be aware that upholstery and wood decors are sometimes displayed inaccurately for technical reasons.

Exterior View

Agile and safe handling thanks to compact van dimensions with an external width of just 2.20 m and an external height of 2.66 m
Proven Lifetime body construction with GRP outer skin and excellent insulation
Agile and safe handling thanks to compact van dimensions with an external width of just 2.20 m and an external height of 2.66 m

Living in the Globebus Go

  • Invitingly modern

    The interior design of the Globebus Go combines matt white, handleless overhead locker doors with natural wood tones and contrasting surfaces in anthracite. The result is a living space that conveys cosiness and style. The Globebus Go is designed as a two-passenger vehicle. Optionally, the bench seat can be upgraded with a seat belt block including two 3-point safety belts, thus allowing up to four vehicle occupants while driving.

  •

    Invitingly modern

    Want to travel in comfort with complete flexibility? The Globebus Go has you covered! As a low-profile motorhome with compact dimensions, it combines impressive agility with an abundance of style, comfort and fine living!

  •

    Invitingly modern

    The Light Moments lighting system, which includes ambient lighting above and below the overhead lockers, creates a particularly homely atmosphere (Comfort Package).

  •

    Sleep like at home

    Dethleffs offers the Globebus Go Low Profile in two layouts.

  •

    Sleep like at home

    Optionally, the comfortable and generously sized (201 x 80 and 193 x 75 cm) single beds can be converted into a large sleeping area in a few easy steps, which extends across the entire width of the vehicle.

  •

    Clever swivel wall solution

    Despite its compact dimensions, the bathroom in both Globebus Go models is surprisingly roomy – thanks to its clever swivel wall. It also comes fully equipped with a sink, toilet and shower.

  •

    Clever swivel wall solution

    The bathroom in the basic position! The swivel wall nestles against the outer wall to save space, creating plenty of elbow room.

  •

    Clever swivel wall solution

    To transform the bathroom into a shower cubicle, simply release the lock and swing the swivel wall out over the toilet.

  •

    Clever swivel wall solution

    The shower cubicle! In combination with the plastic-panelled sliding door, the result is a fully waterproof shower cubicle. We can’t imagine a better use of limited space.

  •

    In the compact kitchenette

    Compact, yet packed with every refinement – the kitchen in the new motorhome has everything you need to satisfy your appetite.

  •

    In the compact kitchenette

    An 83-litre compressor fridge with a freezer compartment is fitted as standard. A 131-litre fridge/freezer combination is optionally available.

  •

    In the compact kitchenette

    The drawers feature high-quality, sturdy pull-outs and offer plenty of convenient storage space.

  •

    In the compact kitchenette

    The practical worktop extension provides extra space for preparing meals

Specification

1
  • Indirect ambient lighting above and below the overhead lockers
  • Large opening skylight in the cab hood
  • Wide habitation door with a window and central locking system
  • Panoramic skylight (70 x 50 cm) above the seating lounge
  • Second rear garage door on the left-hand side – makes loading easy
  • Electrically adjustable, heated wing mirrors
  • Stylish 16-inch alloy wheels, black

Variety of choice

  • Upholstery
Ravello
  • Wood décor
Noce Nagano

Dimensions

1
2
3
4
5

T 45

1 Length 668 cm
2 Height 266 cm
3 Width 219 cm
4 Headroom 190 cm
5 Wheelbase 3750 mm

2,0 l TDCi Ford EcoBlue

Fuel Diesel

6-gear

CCM
1.995
Power
130 hp

Weight

Technically permissible maximum laden mass
3.500 kg
Mass in running order
2.650 kg
Manufacturer-specified mass for optional equipment
680 kg
Towable load braked
2.000 kg
Towable load unbraked
750 kg
Electrical installation
Standard equipment
Awning light 12 V
EBL with separate FI protection switch
Number of sockets 1x 12V, 7x 230V, 4x USB
LED lighting throughout the vehicle
Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator
On-board control panel
Spotlights in the roof lining above the habitation door
Leisure battery AGM, 95 Ah
Optional equipment
2nd AGM habitation battery, 95 Ah incl. 45 A charge booster
2nd habitation battery (lithium), 168 Ah incl. 45 A charge booster
Solar power system 110 watt
Heating
Standard equipment
Diesel hot air heating 6 kW with hot water boiler and integrated height kit
Heating in the seating unit for optimum heat distribution, built-in
Optional equipment
Diesel hot air heating 6 kW with 1.8 kW electric heating element incl. digital control element and integrated height kit
Digital control element for hot air heating
Water supply
Standard equipment
Fresh water tank in insulated and heated area
Submersible pump
Optional equipment
Switch for water pump
Insulated waste water tank
Gas supply
Standard equipment
Storage space for a gas cylinder with a filling weight of 2.75 kg
Show more

Downloads

Important information regarding the selection of your motorhome

Important information regarding the selection of your vehicle

When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:

1. The technically permissible maximum laden mass…

… is a value set by the manufacturer which the vehicle may not exceed. Dethleffs specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.

 

2. The mass in running order…

... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, Dethleffs weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.

Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.


3. The permitted number of seats (including driver)…

… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated. 

Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.


4. The manufacturer-specified mass for optional equipment…

… is a value set by Dethleffs per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle. 

Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.

 

5. The additional weight of optional equipment and packages...

... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.

 

Accept and continue
Dethleffs dealer search
Find your nearest Dethleffs dealer
 
Your dealer information is loading...
Dealer search
 
Close
 
0 Dealer found
More filters
back
0 Dealer found
back
Your dealer information is loading...

Reachability

Weights and payload

DSGVO

Social Media

© Dethleffs 2026